45⁰-elbow PEHD with electrofusion - vertical view 45⁰-elbow PEHD with electrofusion - horizontal view 45⁰-elbow PEHD with electrofusion - vertical view


This 45⁰ elbow belongs to the category of electrofusion fittings. Made from PE100-RC, the 45⁰ elbow is type SDR11, PN10 (gas) or PN16 (water).

A 45⁰ electrically weldable elbow can be used when connecting HDPE and other plastic pipes carrying liquids. Fittings are available in different sizes. Pipes are easy to assemble using electrofusion fittings. The direction of the pipes can be changed or their ends can be closed. They are assembled together using the electrofusion welding machine. Certain equipment is required for welding by the electrofusion method. This equipment must be prepared and cleaned before welding.

Electrofusion is the most reliable method of joining plastic pipes today.


About PE 100-RC

The main technical advantage of PE 100-RC is that it is much more resistant to slow crack growth. This saves costs during installation, improves safety and prolongs the life of the entire piping system.

High operating pressures, as well as expansion and contraction caused by temperature fluctuations, generate stress for welded joints. This is particularly visible in above ground piping systems. The edge of the weld zone in the centre of the joint faces the greatest exposure to internal stress and pressure loads. It has been shown that greater resistance to slow crack growth therefore leads to better long-term results.

The use of fittings and other elements are now manufactured entirely with PE 100-RC. This allows considerable improvements to be achieved in butt welded joints with electrofusion or heated tools. This enhances the long-term safety of underground and aboveground pipeline systems for gas or water supply systems.

PE 100-RC fittings supplied by Homplex are available in a wide range of models and variations and in many cases can be delivered immediately from stock (Bucharest).

Need help or more information? Contact a Homplex specialist now!




PE 100-RC
PE 100-RC Increased resistance to slow crack growth.
Fitting PE 100-RC ARGU Inseparable joints
Inseparable joints Considerable improvements for butt welded joints with electrofusion and heated tools
Fitting PE 100-RC ARGU Very long service life
Durable Minimum lifespan of 8760 hours according to PAS 1075.


Natural gas supply installations
Nominal pressure
Nominal diameter
DN110, DN125, DN160, DN180, DN20, DN200, DN225, DN25, DN32, DN40, DN50, DN63, DN75, DN90
0.05 kg, 0.07 kg, 0.12 kg, 0.20 kg, 0.33 kg, 0.50 kg, 0.85 kg, 1.44 kg, 1.91 kg, 3.40 kg, 4.89 kg, 6.00 kg, 7.99 kg
Electrofusion PE fittings

45⁰ elbow

Product code:
PE 100-RC electrofusion fitting
  • PE 100-RC
  • Inseparable joints
  • Durable