Inoklima Evo X front view Inoklima Evo X right side view Inoklima Evo X side view


Notice: Inoklima EVO X (discontinued) has been replaced by Homplex EVO X!

The Inoklima EVO X is a non-programmable room thermostat ideal for the whole family. Inoklima EVO X can control and maintain room temperature.

Choose from two distinct working modes – for increased comfort or increased savings. Keep the ambient temperature constant using the EVO X in “Manual” mode.

The EVO X thermostat has a large display and an easy-to-use control panel with just three buttons. The EVO X has a “Child Lock” function that allows the thermostat to be locked at any time.





Inoklima Evo X Modulation algorithm
Modulation algorithm Inoklima EVO X adapts the running times of the central heating system to maintain a constant temperature with an optimised number of starts.
Inoklima Evo X Visible information
Visible information Thanks to the illuminated display, you can easily see the information that matters about your heating system and the temperature in your home.
Inoklima Evo X Frost protection
Frost protection Inoklima EVO X does not allow you to select a temperature lower than 5°C, so your installation and heating system will be protected from freezing.


Room Thermostat
Thermostat power supply
3VDC, Batteries, 2 x AA alkaline
Thermostat display
Illuminated LCD
85 x 75 x 23 mm
Division Gas
Releu receiver
250 VAC, 8 A
Available working modes
Comfort, Economy, Manual
Temperature scale
Temperature interval
5 ºC … 35 ºC
Temperature selection step
0.5 ºC
0.1ºC … 5ºC
Hysteresis setting range
0.1 ºC
Additional functions
Algoritm de modulare, Blocare taste (Child Lock), Indicator baterie scăzută, Protecția pompei din centrală, Protecție la îngheț
2 years

Frequent questions

Why does the Inoklima thermostat not respond to commands?
Check if the "Child Lock" function has been activated (the "Lock" symbol is displayed on the screen). If the thermostat is locked, press and hold the " + " and " - " buttons simultaneously to unlock it.
In "Manual" mode, the max. and the minimum available temperature is not 35 ºC and 5 ºC respectively, why?
To be able to select the minimum temperature 5 ºC and the maximum 35 ºC, go to the configuration menu. Change the minimum and maximum temperature allowed.
Why does the thermostat indicate a different temperature and not the real one?
If the Inoklima Evo X indicates a lower or higher temperature than the actual temperature, calibrate the thermostat. Use the options available in the configuration menu (menu page 6). You can calibrate the thermostat by ±5 ºC.
Will the Inoklima Evo X automatically switch between modes depending on the time?
Inoklima Evo X is not a programmable thermostat. Therefore, switching between the two modes must be done manually by you.
My thermostat display is not illuminated, why?
In order to enjoy an illuminated display, you need to enable this feature from the setup menu. The maximum duration of illumination is 5 seconds.
Wired thermostats

Inoklima EVO X

Product code: 3710268-0
Non-programmable wired room thermostat
  • Modulation algorithm
  • Visible information
  • Frost protection