Equal HDPE tee with front view electrofusion Equal HDPE tee with front view electrofusion HDPE tee with electrofusion rear side view HDPE electrofusion tee side view

Description

90⁰ tee electrically weldable tee is used for water and gas supply installations. It is made of PE100 – RC and belongs to the category of electrofusion fittings.

Equal tee for gas installations have a nominal pressure of 10 bar. For water supply, the equal tee has a nominal pressure of 16 bar.

An 90⁰ tee electrically weldable tee can be used when connecting HDPE and other plastic pipes carrying liquids. Fittings are available in different sizes. Pipes are easy to assemble using electrofusion fittings. The direction of the pipes can be changed or their ends can be closed. They are assembled together using the electrofusion welding machine. Certain equipment is required for electrofusion welding. This equipment must be prepared and cleaned before welding.

Electrofusion is the most reliable method of joining plastic pipes today.

 

About PE 100-RC

The main technical advantage of PE 100-RC is that it is much more resistant to slow crack growth. This saves costs during installation, improves safety and extends the life of the entire piping system.

High operating pressures, as well as expansion and contraction caused by temperature fluctuations, generate stress for welded joints. This is particularly noticeable in above ground piping systems. The edge of the weld zone in the centre of the joint faces the greatest exposure to internal stress and pressure loads. It has been shown that greater resistance to slow crack growth therefore leads to better long-term results.

Utilizarea fitingurilor și a altor elemente sunt acum fabricate în întregime cu PE 100-RC. This allows considerable improvements to be achieved in butt welded joints with electrofusion or heated tools. This enhances the long-term safety of underground and aboveground pipeline systems for gas or water supply systems.

PE 100-RC fittings supplied by Homplex are available in a wide range of models and variations and in many cases can be delivered immediately from stock (Bucharest).

Need help or more information? Contact a Homplex specialist now!

 

Informations

Functions

PE 100-RC
PE 100-RC Increased resistance to slow crack growth.
Fitting PE 100-RC ARGU Inseparable joints
Inseparable joints Considerable improvements for butt welded joints with electrofusion and heated tools
Fitting PE 100-RC ARGU Very long service life
Durable Minimum lifespan of 8760 hours according to PAS 1075.

Specifications

Type
SDR11
Material
PE100 - RC
Nominal diameter
DN110, DN125, DN160, DN180, DN20, DN200, DN225, DN25, DN32, DN40, DN50, DN63, DN75, DN90
Weight
0.07 kg, 0.08 kg, 0.13 kg, 0.21 kg, 0.30 kg, 0.56 kg, 0.64 kg, 1.72 kg, 10.98 kg, 13.40 kg, 2.63 kg, 3.70 kg, 6.12 kg, 8.85 kg
Electrofusion PE fittings

90⁰ e-tee

Product code:
PE 100-RC electrofusion fitting
  • PE 100-RC
  • Inseparable joints
  • Durable

Related Products Expand Contract