DN100 EX10 methane gas solenoid valve DN100 EX10 methane gas solenoid valve


The EX10 is a large solenoid valve. Shut off the methane gas supply in case of an emergency. EX10 shuts off methane gas supply in the event of a gas leak in both industrial and residential environments. The material from which the valve body is made is aluminium. Trigger time is less than one second. The supply voltage is 230 V / 50 – 60 Hz and has a maximum pressure of 500 mbar.

When tensioned, the solenoid valve coil releases and isolates the latch. From the moment the coil receives the electrical impulse from the gas leak detection and protection equipment until the methane gas supply is triggered and switched off is less than one second.

Resetting the solenoid valve is manual to check the causes of the detection. The solenoid valve is mounted outside the home. It must be visible and easily accessible. Under normal conditions there is no electrical absorption, no wear. Using a solenoid valve where a methane gas consumer is located is beneficial. This reduces the risk of deflagration due to a gas leak.

Homplex has in its portfolio numerous solenoid valves available for natural gas supply installations, with various nominal diameters, normally open. Need help or more information? Contact a Homplex specialist now!



Dry gases, Non corosive gases
Nominal diameter
Blind flanges DN 100, PN 16
Body material
Power supply
230 / 50 – 60 Hz
Voltage tolerance
15% … +10%
Maximum pressure
6 bar
Ambient temperature
-15°C … +50°C
Protection class
Reaction time
< 1 second

Associated Files

Normal-Open solenoid valves


Product code: 3710014
Gas solenoid valve (solenoid valve) Normally Open