Description

Information: DG816 RF (discontinued) has been replaced by Homplex 816 RF!

The DG816 RF is an easy-to-use, wireless, non-programmable room thermostat. The DG816 RF has a large rotary knob for temperature control and an LCD display that will show the room temperature or the new set temperature in turn.

The DG816 RF thermostat is ideal for the elderly, but also for those who want a simple and efficient device.

Enjoy radio frequency communication and leave the DG816 RF thermostat anywhere in your home using the desk stand.

Informations

Functions

Electric heating? Use the DG816 RF thermostat with electric underfloor heating and enjoy a warm home every moment of the day.

Low battery indicator You'll know exactly when your room thermostat's batteries are (almost) depleted and need replacing.

Simple to use The DG816 RF room thermostat has a single large button that you can use to change the set temperature.

Just see what matters The DG816 RF room thermostat's LCD display shows the room temperature and the new set temperature in turn when changes occur.

Specifications

Usage

Room Thermostat

Type

Non-programmable

Thermostat power supply

3VDC, Batteries, 2 x AA alkaline

Connection

Wireless, 868MHz

Thermostat display

Illuminated LCD

Size

86 x 86 x 32 mm

Brand

Division Gas

Receiver size

110 x 80 x 30 mm

Releu receiver

250 VAC, 8 A

Ieșire de putere (încălzire)

max. 250 VAC, 16 A

Temperature scale

ºC

Temperature selection step

0.5 ºC

Temperature interval

5 ºC … 35 ºC

Additional features

Alarmă de temperatură, Indicator baterie scăzută

Colour

White

Warranty

2 years

Associated Files

[Technical Sheets] DG816 RF
[Technical Sheets] DG816

Frequent questions

How do I know if my thermostat batteries are flat?

A symbol will be displayed on the DG816 RF thermostat screen to let you know when its batteries are low.

Why is "E1" displayed on the DG816 RF screen?

Error "E1" indicates a short circuit on the temperature sensor, and all thermostat functions are suspended. Contact the technical department to check the situation.

Why is the error "E2" displayed on the DG816 RF screen?

"E2" indicates a timing error between the thermostat and the receiver. Set a temperature higher than the ambient temperature. Resume the device synchronisation process as described in the user manual.

The DG816 RF thermostat does not communicate with the receiver, why?

If your thermostat is not communicating with the receiver, make sure there is no error message on the receiver's display. Be careful how you position the receiver. It should be placed in an enclosed space and avoid areas where there may be communication shielding (metal foil and steel reduce signal strength). Leave a space of at least 30 cm from other electronic equipment (computer, radio or TV).

"HI" and "LO" displayed occasionally on the thermostat indicate what?

When the ambient temperature is higher than 30 ºC, the thermostat will indicate "HI". If it has dropped below 5ºC, the thermostat will indicate "LO".