Homplex EVO X non-programmable room thermostat - front Homplex EVO X non-programmable room thermostat - left 30 Homplex EVO X non-programmable room thermostat - right 30 Homplex EVO X non-programmable room thermostat - right Homplex EVO X non-programmable room thermostat - left Homplex EVO X non-programmable room thermostat - rear


The Homplex EVO X is a non-programmable room thermostat ideal for the whole family. The Homplex EVO X can control and maintain room temperature.

Choose between two distinct temperatures – for increased comfort or increased savings. Keep the room temperature constant by using the Homplex EVO X in “Manual” mode.

The Homplex EVO X thermostat has a large display and an easy-to-use control panel with just three buttons. It has a “Child Lock” function that allows the thermostat to be locked at any time.

The Homplex EVO X RF is the successor to the Inoklima EVO X (discontinued).



Homplex EVO X Modulation algorithm
Modulation algorithm Homplex EVO X adapts the running times of the central heating system to maintain a constant temperature with an optimised number of starts.
Homplex EVO X Visible information
Visible information Thanks to the illuminated display, you can easily see the information that matters about your heating system and the temperature in your home.
Homplex EVO X Frost protection
Frost protection Homplex EVO X does not allow you to select a temperature lower than 5°C, so your installation and central heating will be protected from freezing.


Room Thermostat
Thermostat power supply
3VDC, Batteries, 2 x AA alkaline
Thermostat display
LCD illuminated
86 x 86 x 23 mm
Thermostat relay
250 VAC, 8 A
Available working modes
Confort, Economic, Manual
Temperature scale
Temperature setting range
5 ºC ... 35 ºC
Temperature selection step
0.5 ºC
0.1ºC ... 5ºC
Hysteresis selection step
0.1 ºC
Additional functions
Modulation Algorithm, Child Lock, Low Battery Indicator, Power Plant Pump Protection, Freeze Protection
2 years

Frequent questions

Why does the Homplex EVO X thermostat not respond to commands?
Check if the "Child Lock" function has been activated (the "Lock" symbol is displayed on the screen). If the thermostat is locked, press and hold the " + " and " - " buttons simultaneously to unlock it.
In "Manual" mode, the max. and the minimum available temperature is not 35 ºC and 5 ºC respectively, why?
To be able to select the minimum temperature 5 ºC and the maximum 35 ºC, go to the configuration menu. Change the minimum and maximum temperature allowed.
Homplex Evo X will automatically switch between modes depending on the time?
Homplex Evo X is not a programmable thermostat. Therefore, switching between the two modes must be done manually by you.
My thermostat display is not illuminated, why?
In order to enjoy an illuminated display, you need to enable this feature from the setup menu. The maximum duration of illumination is 5 seconds.
Why does the thermostat indicate a different temperature and not the real one?
If the Homplex Evo X thermostat indicates a lower or higher temperature than the actual temperature, calibrate the thermostat. Use the options available in the configuration menu (menu page 6). You can calibrate the thermostat by ±5 ºC.
Wired thermostats

Homplex EVO X

Product code: 3710268
Non-programmable wired room thermostat
  • Modulation algorithm
  • Visible information
  • Frost protection